Veronte Avionics SDL
RS232 LOS Datalink for drones
Reliable line-of-sight datalink operating at 400MHz, 900MHz or 2.4GHz. It enables wireless communication through an RS232 port for both point-to-point and point-to-multipoint setups, housed in a rugged, waterproof aluminum enclosure.
Avionics SDL
RS232 LOS Datalink for drones
Reliable line-of-sight datalink operating at 400MHz, 900MHz or 2.4GHz. It enables wireless communication through an RS232 port for both point-to-point and point-to-multipoint setups, housed in a rugged, waterproof aluminum enclosure.
IP67
RS232
Up to 345 kbps
1W
400/900/2400 MHz
SDL features
LOS Datalink for drone communications
Extreme Noise & Interference Rejection
SDL enhances communication reliability through advanced interference rejection techniques. By implementing frequency hopping and Quad Filter Stages, it effectively mitigates extreme noise and interference, ensuring robust UAV operations.
High speed - low latency
It provides high-speed, low-latency communications for UAVs. Veronte Avionics SDL minimizes interference and latency, providing reliable and real-time data transmission, ensuring almost real-time response communications.
Rugged & IP67 rated
SDL’s are unbeatable due to the IP67 rate, being able to go through hard environmental conditions for ground and air applications, which ensures that no submerged water or dust can get into the unit.
3 Frequency options
The LOS radio for autonomous vehicles is available in 3 different frequency bands, Veronte SDL04 for 400/900MHz, SDL09 for 900MHz and SDL24 for 2.4GHz. Permitting to choose the radios that best suit the mission and country regulations.
Veronte SDL04
Rugged P400-C1S. Software selectable bands 900MHz, 400MHz FHSS or 2W 400MHz AES.
Veronte SDL09
Rugged version of P900. Supported frequency of 902 – 928 MHz. Up to 276kbps.
Veronte SDL24
Rugged version of P2400. Supported frequency of 2.400 – 2.4835 MHz. Up to 345kbps.
3 Frequency options
The LOS radio for autonomous vehicles is available in 3 different frequency bands, Veronte SDL04 for 400/900MHz, SDL09 for 900MHz and SDL24 for 2.4GHz. Permitting to choose the radios that best suit the mission and country regulations.
Veronte SDL04
Rugged P400-C1S. Software selectable bands 900MHz, 400MHz FHSS or 2W 400MHz AES.
Veronte SDL09
Rugged version of P900. Supported frequency of 902 – 928 MHz. Up to 276kbps.
Veronte SDL24
Rugged version of P2400. Supported frequency of 2.400 – 2.4835 MHz. Up to 345kbps.
Robust LOS communicatons
Wireless serial communications with high performance and reliability
EN BLANCO
Frequency Hopping
Embention’s SDL data link employs frequency hopping to enhance communication reliability. By rapidly switching frequencies within the band, SDL mitigates interference and noise, ensuring robust data transmission for UAV operations.
Noise & Interference Rejection
By implementing frequency hopping and offering three frequency options (400 MHz, 900 MHz, and 2.4 GHz) SDL can be easily adapted to all environments and effectively mitigates extreme noise and interference, ensuring robust UAV operations.
32 bits of CRC
Embention’s SDL data link ensures reliable UAV communications by implementing 32-bit CRC for error detection and Automatic Repeat Request (ARQ) for error correction, maintaining data integrity during operations.
Robust LOS communicatons
Wireless serial communications with high performance and reliability.
Frequency Hopping
Embention’s SDL data link employs frequency hopping to enhance communication reliability. By rapidly switching frequencies within the band, SDL mitigates interference and noise, ensuring robust data transmission for UAV operations.
Noise & Interference Rejection
By implementing frequency hopping and offering three frequency options (400 MHz, 900 MHz, and 2.4 GHz) SDL can be easily adapted to all environments and effectively mitigates extreme noise and interference, ensuring robust UAV operations.
32 bits of CRC
Embention’s SDL data link ensures reliable UAV communications by implementing 32-bit CRC for error detection and Automatic Repeat Request (ARQ) for error correction, maintaining data integrity during operations.
Operation Modes
Point to Point
SDL data link supports point-to-point connections, allowing direct communication between one data link and another. This setup ensures efficient data transfer with minimal latency, ideal for UAV operations requiring reliable, low-latency links.
Point to Multipoint
SDL data link supports point-to-multipoint configurations, allowing a single device to communicate with multiple remote units. In this setup, a data link sends data to all units and all remote units send data back.
Repeater
SDL data link can be connected with a repeater. This capability extends the communication range by enabling data exchange between the SDL data link and other remote units, ensuring robust connectivity over greater distances.
Rugged IP67 LOS datalink
Embention steps up into the data link field with the three LOS radios for telemetry and telecommand drone applications, the Veronte SDL04 (400MHz/900MHz), SDL09 (900MHz) and SDL24 (2,4GHz). SDL is designed to withstand harsh environments for ground and air applications. The SDL is waterproof, small and lightweight with four mounting points to suit installation requirements.
Easy to connect
It has a wide range of supply voltages that go from 6,5V up to 36V. RS-232 port is available for communications and SMA port is used for RF antennas. The power output is configurable from 100 MW to 1W (2W for 400MHZ Licensed band). A robust industrial-grade M12 connector is used for power and communication to make any UAV or other application integration easy and reliable.
Rugged IP67 LOS datalink
Embention steps up into the data link field with the three LOS radios for telemetry and telecommand drone applications, the Veronte SDL04 (400MHz/900MHz), SDL09 (900MHz) and SDL24 (2,4GHz). SDL is designed to withstand harsh environments for ground and air applications. The SDL is waterproof, small and lightweight with four mounting points to suit installation requirements.
Easy to connect
It has a wide range of supply voltages that go from 6,5V up to 36V. RS-232 port is available for communications and SMA port is used for RF antennas. The power output is configurable from 100 MW to 1W (2W for 400MHZ Licensed band). A robust industrial-grade M12 connector is used for power and communication to make any UAV or other application integration easy and reliable.
3D Model
Interact with the 3D model and explore every SDL detail.
Size
44 x 26 x 71mm
Weight
68g
Temperature
-40º to 85ºC
Standards
DO-254 | DO-168
Version
1.0
Power
6.5-36VDC
Price
| SDL04 Datalink (400 & 900MHz – 1W – TM/TC) | 1250€ |
| SDL09 Datalink (900MHz – 1W – TM/TC) | 800€ |
| SDL24 Datalink (2.4GHz – 1W – TM/TC) | 800€ |